DRYLOK® WetLook high-gloss sealer Just like natural and man-made stone, concrete and masonry are porous materials that will start to break down, dust, pit, crack and/or stain when subjected to weather, water, oil and UV rays. The only way to prevent damage and deterioration is to protect your surfaces with a good quality sealer. DRYLOK® wet look high-gloss sealer is a clear, non-yellowing, water-base sealer formulated for use on horizontal and vertical masonry surfaces where a high-gloss, WetLook finish is desired.
- Our highest level of moisture vapor barrier protection (25% solids)
- Resists de-icing salts
- Use on bare masonry or previously painted surfaces
- SaltLok® technology helps to prevent the leaching of minerals and salt
- Easy cleanup with warm, soapy water
| Application Method | Brush Garden Spray Pad Applicator Squeegee |
|---|
| Application Temperature | 50 deg F |
|---|
| Base Type | Water |
|---|
| Boiling Point | 100 deg C |
|---|
| Compositions | Propylene Glycol |
|---|
| Coverage Area | 360 sq-ft/gal |
|---|
| Density | 1.02 g/L |
|---|
| Drying Time | 1 hr Touch 4 hr Recoat |
|---|
| Finish | High-Gloss |
|---|
| Flash Point | 5001 deg C |
|---|
| Form | Liquid |
|---|
| Net Content | 1 gal |
|---|
| Odor/Scent | Amine |
|---|
| pH Range | 8 |
|---|
| Resists | Chemical Rust |
|---|
| Traffic Time | 72 to 96 hr |
|---|
| Viscosity | 12 to 18 s |
|---|
