PC-CONCRETE™ anchoring and crack filling epoxy is the epoxy chosen to repair cracks in warehouse and factory floors. Dispense and apply using a standard size caulking gun. Cures hard enough to drive over within 3 hrs at standard temperature. Nothing stronger for your anchoring applications. PC-CONCRETE™ is a two-component (1:1 ratio), 100% solids, high modulus and structural epoxy paste. PC-CONCRETE™ is a solvent-free, no-odor, high strength, moisture insensitive epoxy system. The resin and hardener are uniformly dispensed from a 9 oz cartridge system and mixed through a mixing nozzle using a standard size caulking gun.
- Anchor into marine docks above or below water line
- Bond to pre-stressed floors
- Waterproof floor to wall cracks
- Seal crack in sanitation and chemical storage facility containment area
- Anchor-safe to floor prison and security pick-proof epoxy
- Repair floor in fire station garage
| Color | White |
|---|
| Compositions | Diglycidy Ether of Bisphenol A Trimethylolethane Triglycidy Ether Non Hazardous Proprietary Ingredients Ethylene Glycol Titanium Dioxide Silica Quartz |
|---|
| Container Type | Cartridge |
|---|
| Flammability Rating | 1 |
|---|
| Flash Point | 300 deg F |
|---|
| Form | Paste |
|---|
| Includes | (2) Nozzles |
|---|
| Net Content | 250 mL |
|---|
| Odor/Scent | Slight |
|---|
| pH Range | 2 to 12 |
|---|
| Specific Gravity | 1.4 |
|---|
| Temperature Rating | 35 to 115 deg F |
|---|
| Type | 2-Part |
|---|
| VOC Content | 7.84 g/L |
|---|
MORE DETAILS:
- Application: For anchor bolts or rebar and patch cracks in concrete, damp and underwater environments
